1.1
Nonspillable
The Green Power SLA battery
uses an absorbed electrolyte system. All of the electrolyte is
absorbed into the positive plates, negative plates, and the
separators. Coupled with the use of special sealing epoxies,
and long sealing paths for posts, Green Power SLA batteries
have exceptional leak resistance, and can be used in any
position.
1.2 Sealed and
Maintenance-free Operation
There is no
corrosive gas generation during normal use and no need to
check the specific gravity of the electrolyte or to add water
during the service life.
1.3 High Quality and High
Reliability
The Green Power SLA battery
has stable and reliable capacity. The battery can withstand
overcharge, over discharge, vibration, and shock. To assure
this high quality and reliability, the batteries are 100%
tested on production line for voltage, capacity, seals and the
safety valve are 100% visually inspected before the final
assembly process.
1.4 Exceptional Deep Discharge
Recovery
Green Power batteries have
exceptional deep discharge recovery and charge acceptance,
even after deep or prolonged discharge.
1.5 Low
Self-discharge
Because of the use of lead
calcium grids alloy and highly purity materials. Green Power
SLA battery can be stored long periods of time without
recharge. The rate of Green Power SLA battery self-discharge
on open circuit is less than 2% per month at
20oC/68oF.
1.6 Long Service
Life
The Green Power SLA battery has long
life in standby or cycle service.
1.7 Solid Copper
Terminals
Ensures highest current
carrying capability.
1.8 Tank-formed
Plates
The initial capacity will be 100%
and optimize cell voltage balance, due to the tank formation
of the plates.
1.9 Computer-aided Design and
Manufacturing
Ensures quality products
through control of processes and standards.
| 
